Check Sensor - LAUNCH TECH CRT511 User Manual

LAUNCH
Figure 5-3 (Select 2014~2018)
4. Select 2014~2018 and press the oK button to enter the TPMS function
selection screen.
Note: For indirect TPMS vehicle, only the Learning function is supported. For
vehicle using Direct TPMS, it generally includes: Activation, Programming and
Relearning. The available TPMS functions may vary for different vehicles being
serviced.

5.1 Check Sensor

This function allows users to activate TPMS sensor to view sensor data
such as sensor ID, tire pressure, tire frequency, tire temperature and battery
condition.
28
Figure 5-4
www.x431.com +86 755 8455 7891
1. Select CHeCK SenSor and press the oK button to enter the following
screen.
Figure 5-5
2. For universal sensors, place the tool alongside the valve stem, point toward
the sensor location, and press the
Figure 5-6
Notes:
1. For early magnet-activated sensors, place the magnet over the stem and then
place the tool alongside the valve stem.
2. If the TPMS sensor requires tire deflation (of the order of 10PSI), then deflate
the tire and place the tool alongside the stem while pressing the
www.x431.com +86 755 8455 7891
LAUNCH
button.
button.
29