Register & Update - LAUNCH TECH CRT511 User Manual

LAUNCH
8. register & update
Prerequisite conditions:
1. Go to http://www.x431.com/CRT511 to download the update tool and install
it on the computer.
2. System requirements: Windows XP, 7, 8 or Windows 10.
The tool can be updated via memory card.
1. note down the Serial number and register code.
1). Connect one end of the USB cable to your tool, and the other end on the
computer.
2). After the tool has powered up and entered the main menu screen, move
the highlight bar on the icon and press oK.
3). Highlight the Tool Information and press oK.
54
Figure 8-1
www.x431.com +86 755 8455 7891
Figure 8-2
4). Write down the Serial Number and Register code for later use.
2. register the scanner on the update tool .
For better experience, it is recommended to register and upgrade the tool
first. But if not, the tool can also be used normally.
1). Launch the update tool, the following screen will appear:
Figure 8-3
2). Select the target language and enter the Serial Number, click device
upgrade, the following screen will appear.
Figure 8-4
3). Enter the required E-mail address and Register Code, click Submit to finish
the sign-up.
www.x431.com +86 755 8455 7891
LAUNCH
55