LAUNCH TECH CRT511 User Manual page 29

LAUNCH
a fault has been performed) to confirm that the repair has been performed
correctly, and/or to check for Monitor Run Status.
Select I/M readiness from the Diagnostic Menu and press oK, the screen will
display the I/M readiness result.
N/A means not available on this vehicle, INC means incomplete or not ready,
OK means Completed or Monitor OK.
Press to return to Diagnostic Menu.
4. data Stream
This option retrieves and displays live data and parameters from the vehicle's
ECU.
Select data Stream from the Diagnostic Menu and press oK, the following
screen will appear.
48
Figure 6-11
Figure 6-12
www.x431.com +86 755 8455 7891
• Select View all Items and press oK, the screen will display the dynamic
data of all data stream items:
Figure 6-13
Press the / button to turn page to view other data streams.
Press to return to Diagnostic Menu.
• Select Select Items in Data stream menu and press oK, the following
screen will appear:
Figure 6-14
Press the / button to check data stream items, and press the
button to turn page.
After selecting items, press , the screen will display the selected data
stream items.
To select all data stream of the current page, check the option "All
Datastream of Page" and press oK, √ will appear before all items. To
deselect all, just press oK again.
www.x431.com +86 755 8455 7891
LAUNCH
/
49