Copy Id By Activation - LAUNCH TECH CRT511 User Manual

LAUNCH

5.2.3 Copy Id by activation

This function allows users to write in the retrieved original sensor data to the
LAUNCH-sensor. It is used after the original sensor is triggered.
Select CoPy Id By aCTIVaTe and press the oK button to enter.
Select the specific wheel position and press the
original sensor. After the information is retrieved, it will be displayed on the
screen.
Press the oK button to continue.
36
Figure 5-20
button to trigger the
Figure 5-21
www.x431.com +86 755 8455 7891
Figure 5-22
Select the specific wheel position and press the oK button to create a sensor
ID.
Figure 5-23
Press the oK button to start writing the new sensor ID to the LAUNCH-sensor.
www.x431.com +86 755 8455 7891
LAUNCH
37