Program Multi-Sensor; Tpms Service; Relearn Procedure - LAUNCH TECH CRT511 User Manual

LAUNCH
After the sensor is successfully programmed, the following screen will appear.
button to return to the previous screen. Press the oK button to
Press the
continue programming other sensors.

5.2.4 Program multi-sensor

This function allows users to program multiple sensors simultaneously. Up to 8
sensors can be programmed at the same time.
Stack up multiple sensors, select CreaTe MuLTI-SenSor (1-8) to start
programming.
After the sensors were successfully programmed, the following screen will
appear.
38
Figure 5-24
Figure 5-25
Figure 5-26
www.x431.com +86 755 8455 7891
Figure 5-27
Press the button to return to the previous screen. Press the oK button to
continue programming other sensors.

5.3 TPMS Service

This function includes two modules: Relearn Procedure and Part Number
Lookup.
Select TPMS SerVICe and press the oK button to enter the following screen.
Figure 5-28

5.3.1 relearn procedure

This function allows you to check and view the detailed TPMS sensor relearn
procedures.
Relearn operation applies only when the newly programmed sensor IDs are
different from the original sensor IDs stored in the vehicle's ECU. Relearn is
www.x431.com +86 755 8455 7891
LAUNCH
39