Fire Sense 60368 Manual page 7

ASSEMBLY
7
Attach Head Assembly
Hardware Used: 4x Small Bolt w/Lock Washer
8
NOTE: MAKE SURE TO REMOVE
PROTECTIVE PLASTIC COVER ON REFLECTOR PIECES
PRIOR TO ASSEMBLY!
Ass
sections, loosen each screw prior to further assembly and
retighten after sections are aligned.
Slide two
Screw on Cap Nut loosely.
Repeat with the other
Slide
Panels . Insert one Small Screw and screw on Cap Nut
A
loosely. Repeat with two more Small Screws and Cap Nuts
cap nuts.
Hardware Used: 12x Small Screw | 12x Cap Nut
Contact us for assistance: (866) 985-7877 | www.
C to Upper Post F
A together. Insert one Small Screw.
A .
onto assembled
B
7