Pair Your Remote Control - Polycom G7500 User Manual

Pair Your Remote Control

Out of the box, your remote control is paired with the G7500 system, so no setup is required. To use a
different remote control, you must pair it with the system.
Procedure
1. Press the Bluetooth
A pairing screen displays.
2. With your remote control close to the monitor, long press the red Mute
seconds.
3. Follow the instructions on the pairing screen.
The screen displays either a successful or unsuccessful pairing notification.
Note: If pairing is unsuccessful, remove the batteries from the remote control and insert them
again in about five seconds. Move your remote control closer to the system than other
remote controls and try to pair again.
4. To end the pairing process, select Skip Pairing.
Polycom, Inc.
button on the front of the system.
Using a Remote Control
button for at least seven
14