Diagnostic Settings Reference - Polycom G7500 User Manual

Diagnostic Settings Reference

Diagnostics are tools to test your system's performance. The diagnostic tool locations vary depending on
whether you are in or out of a call as described below.
Certain settings display a lock
administrators.
Do one of the following:
▪ In a call: Go to Menu
▪ Out of a call: Go to Menu
Diagnostic Settings
Setting
Near End Loop
Ping
Trace Route
Color Bars
Speaker Test
Polycom, Inc.
on your system. This indicates that the setting is limited to system
> More > Settings
> Settings > Diagnostics
Description
Available only out of a call. Tests the internal audio
encoders and decoders, external microphones and
speakers, internal video encoders and decoders, audio
hardware, external microphones, speakers, cameras,
and monitors. Monitor 1 displays the video and plays
the audio sent to the far site in a call.
Tests whether the system can connect with a far-site IP
address that you specify. Ping returns abbreviated
Internet Control Message Protocol results. If you've
configured the far site for H.323, it returns H.323
information. It returns SIP information only if you've
configured the far site for SIP. If the test is successful,
the system displays a message.
Tests the routing path between the local system and
the IP address you enter. If the test is successful, the
system lists the hops between the system and the IP
address.
Tests the color settings of your monitor for optimum
picture quality. If the color bars generated during the
test aren't clear, or the colors don't look correct, adjust
the monitor settings.
A 473 Hz audio tone indicates whether the local audio
connections are correct. If you run this test during a
call, the far site hears the tone. You can test the left or
right speaker. If Start Both is displayed, you can also
test both speakers at the same time.
> Diagnostics
System Settings
36