Snmp/Traps; Management/Maint Port; Maint Port/Password Protect; Maint Port/Password - ADTRAN Express 6100 Manual

Chapter 3. Terminal Menu Operation and Structure
Communities/Manager IP
Write security: 1; Read security: 3
This is the IP address of SNMP manager. If set to 0.0.0.0, any SNMP
manager can access the Express 6100/6120 for this community.

SNMP/Traps

The Express 6100/6120 can generate SNMP traps. See SNMP on page
C-1 for trap types supported. This list allows up to four managers to
be listed to receive traps.
Traps/Manager Name
Write security: 2; Read security: 4
This is the text string describing the name of the entry. It is intended
for easy reference and has no bearing on the SNMP trap function.
Traps/Manager IP
Write security: 2; Read security: 4
This is the IP address of the manager that is to receive the traps.
»» Management/Maint Port
The Express 6100/6120 has an EIA-232 connector on the back of the
unit. The setup for that port is under this menu.

Maint Port/Password Protect

Write security: 0; Read security: 1
When set to No, the maintenance port is not password protected.
When On (def), the Express 6100/6120 will prompt for a password
upon startup.

Maint Port/Password

Write security: 0; Read security: 1
This is the text string that is used for comparison when password pro-
tecting the maintenance port. By default, no password is entered.
61200176L1-1 Express 6100/6120 User Manual 3-55