MCK EXTender PBXgateway System Administrator Manual page 44

Connections to the Network Device
The PBXgateway connects to a variety of network devices through a Synchronous-
Introduction
serial connection, or 10BaseT Ethernet connection. The physical connection is
accomplished through two DB-25 connectors labeled WAN1 and WAN2, or an RJ-
45 Ethernet connector. The following protocols are recommended:
Synchronous Protocol
Connection Types
Asynchronous
Protocol
Internet Protocol
Protocol
Connection Type
Reference Information
For more information on specific network requirements, refer to the PBXgateway
Application Guide.
PBXgateway System Administrator's Guide
•
High level Data Link Control (HDLC)
•
A link layer protocol standard for point-to-point and multi-point
communications.
•
RS-232 (see page 45 for pinouts)
•
V.35 (see page 46 for pinouts)
•
RS-530 (see page 46 for pinouts)
•
V.120
•
Clear-async-bonding
•
Internet Protocol (IP)
•
Standard network protocol.
•
10BaseT Ethernet
44