MCK EXTender PBXgateway System Administrator Manual page 43

Mounting the PBXgateway
The following procedure explains the steps necessary to secure the PBXgateway to a
Introduction
standard 19 inch communications rack.
Note: The Rack is not supplied with the unit.
Procedure 1. Attach the mounting brackets to the unit.
2. Position the unit so the mounting brackets are aligned with the mounting holes of
the chassis. (see Figure 6 below)
3. Secure the unit with mounting hardware (4 screws) provided.
PBXgateway System Administrator's Guide
Figure 6: Mounting the unit
43