Advertisement
18
www.raider.bg
cordless machine, you hold your finger on the switch trigger, there is a risk of an accident at work.
3.4. Avoid the unnatural positions of the body. Work in a stable position of the body and at any
moment maintain balance. This will allow you to control the accumulator angle better and safer if an
unexpected situation arises.
3.5. Work with appropriate clothing. Do not work with wide clothing or jewelery. Keep your hair,
clothes and gloves at a safe distance from the rotating units of the battery machine. Wide clothes,
jewellery, long hair can be captured and dragged by rotating parts.
3.6. Before turning on the angle grinder, be sure to remove all the tools and wrenches. An instrument
forgotten on a rotating unit can cause trauma.
3.7. If it is possible to use an external aspiration system, make sure it is on and functioning properly.
The use of an aspiration system reduces the risks due to the dust released.
4. Careful attitude towards the cordless angle grinder.
4.1. Do not overload the cordless grinder. Only use the cordless machine according to its purpose.
You will work better and safer when using the right cordless angle grinder at the manufacturer's
specified load range.
4.2. Do not use an angle grinder whose switch trigger is damaged.
An angle grinder, which can not be switched off and turned on in the manner provided by the
manufacturer, is dangerous and needs to be repaired.
4.3. Keep the battery in places where it can not be reached by children. Do not allow it to be used by
people who are unfamiliar with how to use it and have not read these instructions. When in the hands
of inexperienced users, the rechargeable machine can be dangerous.
4.4. Keep the cordless grinder carefully. Verify that the movable units work flawlessly, do not lock,
have broken or damaged parts that break or alter the functions of the battery machine. Before using
the cordless machine, make sure the damaged parts are repaired. Many accidents at work are due to
poorly maintained power tools and appliances.
4.5. Keep the cutting tools always well sharpened and clean. Well-maintained cutting tools with sharp
cutting edges have less resistance and are easier to work with.
4.6. Use the battery machine, accessories, and tools according to the manufacturer's instructions.
Also keep in mind the specific working conditions and operations you must complete. Using a
rechargeable machine for applications other than those provided by the manufacturer increases the
risk of accidents at work.
4.7. The repair of your power tools is best done only by qualified RAIDER service specialists, where
only original spare parts are used. This ensures their safe operation.
5. Safety instructions specific to the purchased angle grinder.
General instructions for safe sanding and sanding work, wire brush cleaning and abrasive disk
cutting.
5.1. This angle grinder can be used for carbide disc sanding, abrasive brushing, wire brush cleaning,
carburettor cutting. Obey all instructions and warnings, keep abreast of the technical specifications
and images. Failure to follow the instructions below may result in electric shock, fire and / or serious
injury.
5.2. This angle grinder is not suitable for polishing. Performing activities for which the angle grinder is
not designed can be dangerous and lead to injuries.
5.3. Do not use any accessories that are not recommended by the manufacturer specifically for this
power tool. The fact that you can attach a particular tool or tool to the machine does not guarantee
safe operation.
5.4. The permissible rotational speed of the work tool must be at least equal to the maximum
rotational speed on the angle plate. Work tools that rotate at a faster speed than the maximum
allowed on the angle grinder can break and pieces of them to jerk at high speed.
5.5. The outside diameter and thickness of the tool must correspond to the data given in the technical
characteristics of your angle grinder. Work tools of inappropriate size can not be properly shielded or
adequately controlled.
5.6. Sanding discs, flanges, discs, or other applied tools should fit exactly on the angle of your angle
grinder. Work tools that do not fit exactly on the angle grinder rotate unevenly, vibrate loudly, and lead
Advertisement
