Advertisement
21
the wire brush by pressing it too hard. The wire brushes that run off the wire brush can easily penetrate your
clothes and / or skin.
10.2. Make sure that the wire brush does not touch the safety guard.
Disk and cup-shaped wire brushes can increase their diameter due to the force of compression and
centrifugal forces.
11. Additional instructions for safe operation.
Work with safety glasses.
11.1. Use appropriate utensils to locate any hidden subfloor piping, or contact your local supply company.
Contact with live wires may cause fire and electric shock. Damage to a gas pipeline may lead to an
explosion. Damage to the water mains results in major material damage and may cause electric shock.
11.2. When handling stone materials, work with an external dust extraction system. The use of a dust
collection system limits the health damage caused by the dust.
11.3. While working, hold the angle grinder firmly with both hands and hold a firm body position. With both
hands, the angle grinder is safer.
11.4. Provide the machined detail. A detail gripped with appropriate fittings or brackets is locked more firmly
and securely than if you hold it by hand.
11.5. Keep your workplace clean. Mixtures of different materials are particularly dangerous. Fine castings of
light metals can self-ignite or explode.
11.6. Do not use any accessories that are not recommended by the manufacturer specifically for this power
tool. The fact that you can attach a particular tool or tool to the machine does not guarantee safe operation.
11.7. Never place your hands near rotating work tools.
11.8. Regularly clean the ventilation holes of your cordless machine.
11.9. Use only the recommended battery and charger.
11.10. To clean the cordless machine, use soft and dry cloth. Never use any solvent or alcohol.
12. Functional description and design of the accumulator angle grinder.
The cordless grinder is a brushless power tool powered by a battery. It is powered by a DC electric motor
with permanent magnets and a planetary gear with cylindrical gears. The accumulator angle grinder is
designed for cutting and grinding materials such as stone and metal. The angle grinder is designed for
cutting, rough grinding and wire brushing on metal and stone surfaces without water. With special sanding
accessories, the angle grinder can also be used for abrasive sanding. Power tools with rechargeable
cordless power supply are particularly suitable for work related to interior decoration, room adaptation, and
more.
When working on metal and stone, the grinding wheel should only be used when the fuse is installed!
It is not allowed to use the power tool for activities other than its intended purpose!
13. Noise and vibration data.
The noise and vibration values have been measured in accordance with EN 60745:
Sound pressure level: LpA = 92,8dB(A) K = 3 dB (A)
Sound power level: LwA = 103,8 dB(A)
Vibration acceleration (handle): ah = 10.421 m / s2, error K = 1.5 m / s2
Vibration Acceleration Value / Additional Handle /: ah = 4,144 m / s2, error K = 1.5 m / s2
14. Preparation for work.
14.1. Use protective equipment.
14.1.1. Protective guard.
Install the safety casing of the grasping foot on the angle grinder. Adjust the position of the protective guard
according to the specific activity being performed. Install the protective guard so that it is protected from
sparks that run out of work.
14.1.2. An auxiliary / additional handle.
Use your angle grinder only with an auxiliary handle mounted. Wind the auxiliary handle depending on how
the machine is working on the left, top, or right of the head (3 positions).
14.2. Mounting of grinding tools.
When working, sanding and cutting discs are heavily heated, do not touch them until they have cooled.
Clean the shaft and all the parts you will mount. While tightening and releasing the tools, press the
button to lock the shaft of the angle grinder. Press the shaft locking button only when it is stationary.
Otherwise, the angle grinder may be damaged.
Advertisement
