Table of Contents
Advertisement
SCPI Commands HMC8012
[SENSe:]CONTinuity:BEEPer[:STATe] {ON|OFF}
Activates or disables the beeper of the continuity measurement function.
Parameters:
<State>
S C P I P r o g r a m m e r s M a n u a l
S C P I P r o g r a m m e r s M a n u a l
S C P I P r o g r a m m e r s M a n u a l
[SENSe:]CONTinuity:BEEPer[:STATe]?
Returns the beeper state of the continuity measurement function.
AC I configuration commands
CONFigure:CURRent:AC [{<Range>|AUTO|MIN|MAX|DEF}] ..................................... 36
[SENSe:]CURRent:AC:BANDwidth? [{MIN|MAX}] ..................................................... 37
[SENSe:]CURRent:AC:NULL[:STATe] {ON|OFF} ......................................................... 37
[SENSe:]CURRent:AC:NULL[:STATe]? ....................................................................... 37
[SENSe:]CURRent:AC:NULL:VALue? [{MIN|MAX}] .................................................... 38
[SENSe:]CURRent:AC:RANGe:AUTO? ...................................................................... 38
[SENSe:]CURRent:AC:RANGe[:UPPer]? [{MIN|MAX}] ............................................... 39
:ACQuire
:CHAN1OFFSet
CONFigure:CURRent:AC [{<Range>|AUTO|MIN|MAX|DEF}]
Configures the instrument for AC I measurements, but does not initiate a measurement. Use the READ? command to
query the AC I measurement value with specified range or the CONF? command to query the AC I function configura-
tion.
Parameters:
<Range>
HAMEG Instruments GmbH • Industriestr. 6 • D-63533 Mainhausen • Deutschland
HAMEG Instruments GmbH • Industriestraße 6 • D-63533 Mainhausen
HAMEG Instruments GmbH • Industriestraße 6 • D-63533 Mainhausen
Tel.: +49 (0) 6182 800 0 • Fax: +49 (0) 6182 800 100 • E-Mail: info@hameg.com
Tel.: +49 (0) 6182 800 0 • Fax: +49 (0) 6182 800 100 • E-Mail: info@hameg.com
Tel.: +49 (0) 6182 800 0 • Fax: +49 (0) 6182 800 100 • E-Mail: info@hameg.com
Geschäftsführer: Dipl.-Ing. Holger Asmussen, Dipl.-Ing. Andre Vander Stichelen • AG Offenbach am Main HRB 41200
Geschäftsführer: Dipl.-Ing. Holger Asmussen • AG Offenbach am Main HRB 41200
Geschäftsführer: Dipl.-Ing. Holger Asmussen • AG Offenbach am Main HRB 41200
ON | OFF
ON:
Activates the beeper function of the continuity measurement function
OFF:
Disables the beeper function of the continuity measurement function
*RST:
OFF
1 | 0
1:
Beeper of the continuity measurement function is activated
0:
Beeper of the continuity measurement function is disabled
:DISPlay
20mA, 200mA, 2A, 10A
:HCOPy
AUTO:
Auto range
MIN:
20mA
MAX:
10A
DEFault:
20mA
*ESR?
If the input signal is greater than can be measured on the selected range (manual ranging),
the instrument returns 9.90000000E+37.
*RST:
AUTO
H M O S e r i e s
H M S S e r i e s
H M S S e r i e s
Firmware Version: 01.020 and later
Firmware Version: 01.020 and later
Firmware Version: 03.00 and later
:MEASure
:LOGic:SIZE
*OPC?
:POD1
:SYSTem
*SRE?
Subject to change without notice
Subject to change without notice
Subject to change without notice
36
1
1
1
Advertisement
Chapters
Table of Contents
