Hameg HMC8012 Programmer's Manual page 27

SCPI Commands HMC8012
TRIGger:INTerval? [{MIN|MAX}]
Returns the trigger time interval for the single trigger mode before returning to the „idle" trigger state.
Return values:
<Interval>
S C P I P r o g r a m m e r s M a n u a l
S C P I P r o g r a m m e r s M a n u a l
S C P I P r o g r a m m e r s M a n u a l
TRIGger:LEVel {<Level>|MIN|MAX|DEF}
Selects the trigger level (threshold) for the auto trigger mode.
Parameters:
<Level>
TRIGger:LEVel? [{MIN|MAX}]
Selects the trigger level (threshold) for the auto trigger mode.
Return values:
<Level>
:ACQuire
TRIGger:LEVel:MODe {CONTinue | ABOVe|BELow}
:CHAN1OFFSet
Selects the trigger level mode in the auto trigger mode.
Parameters:
‹Level Mode›
TRIGger:LEVel:MODe?
Returns the trigger level mode in the auto trigger mode.
Return values:
‹Level Mode›
HAMEG Instruments GmbH • Industriestr. 6 • D-63533 Mainhausen • Deutschland
HAMEG Instruments GmbH • Industriestraße 6 • D-63533 Mainhausen
HAMEG Instruments GmbH • Industriestraße 6 • D-63533 Mainhausen
Tel.: +49 (0) 6182 800 0 • Fax: +49 (0) 6182 800 100 • E-Mail: info@hameg.com Tel.: +49 (0) 6182 800 0 • Fax: +49 (0) 6182 800 100 • E-Mail: info@hameg.com
Tel.: +49 (0) 6182 800 0 • Fax: +49 (0) 6182 800 100 • E-Mail: info@hameg.com
Geschäftsführer: Dipl.-Ing. Holger Asmussen, Dipl.-Ing. Andre Vander Stichelen • AG Offenbach am Main HRB 41200
Geschäftsführer: Dipl.-Ing. Holger Asmussen • AG Offenbach am Main HRB 41200
Geschäftsführer: Dipl.-Ing. Holger Asmussen • AG Offenbach am Main HRB 41200
Trigger time interval value in single trigger mode.
<Seconds>: 0 to 3,600s
MIN: 0.0E+00s
MAX: 3.6000E+03s
Trigger threshold value in auto trigger mode.
<Level>: -750V to 750V
MIN: -750V
MAX: 750V
DEFault: 0V
*RST: 0.0E+00V
Trigger threshold value in auto trigger mode.
<Level>: -750V to 750V
MIN: -7.5000E+02
MAX: 7.5000E+02
:DISPlay
Trigger level in auto mode
CONTinue: Continuous mode
ABOVe: Upper threshold trigger level
BELow: Lower threshold trigger level
:HCOPy
*RST: CONT
*ESR?
Trigger level in auto mode
CONTinue: Continuous mode
ABOVe: Upper threshold trigger level
BELow: Lower threshold trigger level
H M O S e r i e s
H M S S e r i e s
H M S S e r i e s
Firmware Version: 01.020 and later
Firmware Version: 01.020 and later
Firmware Version: 03.00 and later
:MEASure
:LOGic:SIZE
*OPC?
HMO352x, HMO2524
HMO72x ... HMO202x
:POD1
:SYSTem
*SRE?
Subject to change without notice
Subject to change without notice
Subject to change without notice
English
English
English
27
1 1
1