Page 3
HMO72x ... HMO202x In addition to a LAN interface, the HMC8012 includes a USB device port. For this interface, the user can select if the instrument is accessed via virtual COM port (VCP) or via USB TMC class. The traditional version of the VCP allows the user to communicate with the HMC using any terminal program via SCPI commands once the corresponding Windows Firmware Version: 01.020 and later...
Page 4
1.1.3 GPIB Interface (IEC/IEEE Bus Interface) HMO72x ... HMO202x In addition to the GPIB functions which are available via USB TMC class, the HMC8012 is optionally available with an integrated GPIB interface. This solution is particularly attractive for customers who already have an existing GPIB Firmware Version: 01.020 and later...
Page 21
SCPI Commands HMC8012 Command Reference This chapter provides the description of all remote commands available for HMC8012. The commands are sorted according to the menu structure of the instrument. A list of commands in alphabetical order ist given in the „List of Commands“...
Return values: <Value> If the HMC8012 is not configured in DCI/DCV or DCV/DCI mode „-1“ will be returned. HAMEG Instruments GmbH • Industriestr. 6 • D-63533 Mainhausen • Deutschland Subject to change without notice HAMEG Instruments GmbH • Industriestraße 6 • D-63533 Mainhausen Subject to change without notice HAMEG Instruments GmbH •...
Need help?
Do you have a question about the HMC8012 and is the answer not in the manual?
Questions and answers