CHAPTER 3 ENGINE
4. Inspect:
Crankshaft sprocket
Wear/ Damage → Replace crankshaft.
Bearing
Wear/ Crack /Damage → Replace crankshaft.
Pump drive gear
Wear/ Damage → Replace crankshaft.
Balancer drive gear
Wear/ Damage → Replace crankshaft.
5. Inspect:
Crankshaft journal
→
Clogged
Blow out
compressed air.
BALANCER INSPECTION
Inspect:
Balancer driven gear
Wear/ Damage → Replace balancer.
CRANKCASE INSTALLATION
1. Clean all the gasket mating surface and
crankcase mating surface thoroughly.
2. Apply:
Sealant
(onto the crankcase mating surfaces)
NOTE:
DO NOT ALLOW any sealant to come into
contact with the oil gallery.
3. Install:
Dowel pins
Timing chain
NOTE:
Install the timing chain not to be seen through
the crankshaft hole
○
4
E
A
the
journal with
○
on the crankcase (left).
a
E
A
A
BUCK 450 SERVICE MANUAL 20.0
CHAPTER 3
ENGINE
PAGE. 3- 55