CHAPTER 3 ENGINE
NOTE:
Remove the radiator cap after removing the
drain bolt.
4. Clean:
Radiator
Fill soft water into the filer neck support
(reservoir tank).
5. Install:
Gasket
NEW
Drain bolt
6. Loosen:
Hose
7. Connect:
Hose (reservoir tank)
8. Fill:
Radiator
( to specified level )
Fill the coolant slowly, until the coolant comes
out from the head hose.
Reservoir tank
( to maximum level
Recommended coolant:
High quality ethylene glycol anti-freeze
containing
aluminum engine.
Handling notes for coolant:
Coolant is potentially harmful and should be
handled with special care.
○
)
a
E
A
A
corrosion
inhibitors
for
BUCK 450 SERVICE MANUAL 20.0
CHAPTER 3
ENGINE
PAGE. 3- 14