Linhai ARCHON 400 Service Manual page 124

CHAPTER 5 FINAL DRIVE
5.1 WH E E L , H U B , AND SPINDLE TORQUE TABLE
Front
Rear
Front Hub Nut on Spindle/ outer CV joint
Rear Hub Retaining Nut
Refer to exploded views and text for torque values of other fasteners.
CAUTION: Locking nuts, and bolts with pre-applied locking agent should be replaced if
removed. The self- locking properties of the nut or bolt are reduced or destroyed during
removal.
5.2 FRONT HUB EXPLODED VIEW
5.3 FRONT HUB REMOVAL/INSPECTION
1. Elevate front end and safely support machine
under footrest/frame area.
CAUTION: Serious injury may result if machine tips
or falls. Be sure machine is secure before beginning
this service procedure. Wear eye protection when
removing bearings and seals.
2. Check bearings for side play by grasping the
tire/Wheel firmly and checking for movement.
Item
heel Nuts
W
heel Nuts
W
BUCK 450 SERVICE MANUAL 20.0
Specification
55 Ft.Lbs 75 Nm
55 Ft.Lbs 75 Nm
103 Ft.Lbs 140 Nm
103Ft.Lbs 140 Nm
CHAPTER 5 FINAL DRIVE. 5- 2