5.
System Update
The firmware update is provided by Qbit as a single file with the file name
"qbit_q56x_fw_xxx.gz" . This file must be get ready on your computer before update.
_fw_xxx.gz" . This file must be get ready on your computer before update.
_fw_xxx.gz" . This file must be get ready on your computer before update.
(xxx: Version number)
Start the P56x web-server in a browser.
•
Choose Profiles under the menu Configuration and save the current
Choose Profiles under the menu Configuration and save
•
configuration on your computer.
Select the menu Firmware Upload and load the file.
Select the menu Firmware Upload and load the file.
•
Press the Send button to start the update. The update process must not be
Press the Send button to start the update. The update process must not be
Press the Send button to start the update. The update process must not be
•
interrupted.
Select the menu Restart and achieve a Hard Reboot with Default to ensure t
Select the menu Restart and achieve a Hard Reboot with Default to ensure t
Select the menu Restart and achieve a Hard Reboot with Default to ensure that
•
the IP address of the CTRL interface won't be reset.
the IP address of the CTRL interface won't be reset.
Choose Profiles under the menu Configuration and reload the configuration.
Choose Profiles under the menu Configuration and reload the configuration.
Choose Profiles under the menu Configuration and reload the configuration.
•
Select the menu Restart and achieve a restart.
Select the menu Restart and achieve a restart.
•
provided by Qbit as a single file with the file name
server in a browser.
42