4.2. Network configuration using the Web Interface
Network configuration using the Web Interface
It is not recommended to use the web interface for the configuration
It is not recommended to use the web interface for the configuration
It is not recommended to use the web interface for the configuration
of
the unit´s IP addresses. If you forget the actual IP address, the
the unit´s IP addresses. If you forget the actual IP address, the
the unit´s IP addresses. If you forget the actual IP address, the
device
Start the P56x integrated web-server. For information how to access and login
section 3 On System HTTP/Web
On System HTTP/Web-server.
Click the Configuration link and a sub menu appears. Select the
can type the desired values for the IP address, Netmask, Default gateway and
can type the desired values for the IP address, Netmask, Default gateway and
can type the desired values for the IP address, Netmask, Default gateway and
Ethernet mode for both the Control Interface and Data Interface according to your
Ethernet mode for both the Control Inter
network.
Ethernet mode:
Allows you to set the Ethernet mode.
Allows you to set the Ethernet mode.
Configuration options: [Autonegotiation] [10MBit/s Halfduplex]
Configuration options: [Autonegotiation] [10MBit/s Halfduplex]
may become unreachable via IP.
may become unreachable via IP.
server. For information how to access and login see
server. For information how to access and login
link and a sub menu appears. Select the Network
face and Data Interface according to your
[10MBit/s Fullduplex] [100MBit/s Halfduplex]
[10MBit/s Fullduplex] [100MBit/s Halfduplex]
[100MBit/s Fullduplex]
[100MBit/s Fullduplex]
31
Network link. You