Confirm your settings with save and press the "Restart system" button. The P56x will
reboot and the changed configuration will be used.
Shut down the browser to log off the P56x web-server.
Note
For a relogin you now need to enter the new network settings into your web
browsers address field.
4.3. P56x configuration using the Web Interface
Note
In case of a new P56x unit, you must configure the IP address according to
your administration network with the keys and display at the front panel of
the unit. For details see section 4.1 .
Start the P56x integrated web-server. For information how to access and login see
section 3 On System HTTP/Web-server.
Click the Configuration link and depending on your P56x model the appropriate
configuration screen appears.
When all settings are done, click the button "Save" at the bottom of the configuration
page.
Restart the system and the changed configuration will be activated.
Shut down the browser to log off the P56x web-server.
4.4. P560 Codec Configuration
The Configuration menu Codec supports the following settings:
32