Table of Contents
Advertisement
3.3.4.1.
SNMP Settings
Allows you to set the required UDP Port number and the password for the read and
write community.
3.3.4.2.
SNMP Traps
Trap Version
Trap Version options: [SNMPv1][SNMPv2c]
Enable/Disable Traps:
a) Alarm
Reports whether the audio level threshold selected under 3.3.6 Alarms is out of
tolerance range.
b) Configuration Changed
Reports any changes made in the configuration of the P561.
c) Encoder Audio (AES-Lock)
Reports the receiving of a valid digital audio AES-Signal.
d) Decoder Synchronisation
Valid audio data is received and being decoded.
e) Audio Level
f)
ISDN Test-Connection (ISDN models only)
Checks in periodic intervals if the ISDN connection is available.
g) ISDN Connect Status (ISDN models only)
Trap Destination
Up to 6 trap destinations are available.
Allows you to set the Sink Address, Sink Port (default 162) and the Community
password for the appropriate trap destination.
3.3.5. Security
Allows you to change the administrator password.
25
Advertisement
Table of Contents
