International Datacasting P56 Series Manual page 13

Encoder: up to 4 analog inputs or up to 8 digital AES/EBU inputs or mixed
•
Decoder: up to 4 analog outputs or up to 8 digital AES/EBU outputs or mixed
•
Codec: up to 2 analog inputs or 4 digital AES/EBU inputs or mixed and up to 2
•
analog outputs or 4 digital AES/EBU outputs or mixed
Depending on the way the unit was ordered, the analog connectors have to be
connected to the correct LEFT and RIGHT inputs.
2. Ethernet ports
ETHERNET 10/100 CTRL
•
Please connect the network to the LAN interface connector ETHERNET 10/100
CTRL, for the controlling of the device.
ETHERNET 10/100 DATA (Models without ISDN operation only)
•
Then connect the data network to the LAN interface connector ETHERNET 10/100
DATA, for the transport stream output over IP.
3. ASI connectors
ASI 1 or ASI 2
Please connect the ASI cable to ASI 1 or ASI 2 for transport stream output.
4. ISDN (Advanced ISDN models only)
Please connect the rightmost Audio connector to the ISDN connector.
5. GPIO
Please connect the GPIO Connector to the control device.
6. ANCILLARY DATA
Output signal e.g. RDS
7. Option 1 ( future option )
8. Option 2 ( future option )
9. A/C power
There are two possible device variants:
a) One A/C power connector and switch.
Plug in the A/C power connector and switch on the unit.
b) Two A/C power connectors for redundant unit.
Plug in the A/C power connector.
13