Hard Reboot; Hard Reboot With Defaults - International Datacasting P56 Series Manual

3.5.2. Hard Reboot

For a defined state of your P56x
All parameters will be set to default values. All parameters will be set to default values.
Don't use this button after a firmware update. The IP address of the CTRL Don't use this button after a firmware update. The IP address of the CTRL Don't use this button after a firmware update. The IP address of the CTRL
interface will be reset. interface will be reset.

3.5.3. Hard Reboot with Defaults

Hard Reboot with Defaults
To power cycle the device after a firmware update. The IP address of the CTRL To power cycle the device after a firmware update. The IP address of the CTRL To power cycle the device after a firmware update. The IP address of the CTRL
interface is reset to the default value of 192.168.93.152. interface is reset to the default value of
P56x you have the possibility to power cycle the device. you have the possibility to power cycle the device.
28