2.2.2. Decoder P562
2.2.3. Codec P560
2.3. Installation for P56x models
Mount the rack-mount 19" 1U unit and connect the
mount 19" 1U unit and connect the following connectors:
1. Audio Connectors LEFT 1-
Please connect an analog stereo input signal to any two of the LEFT and RIGHT
Please connect an analog stereo input signal to any two of the
connectors. In case of a digital input signal, please connect the digital stereo input
In case of a digital input signal, please connect the digital stereo input
In case of a digital input signal, please connect the digital stereo input
signal to any LEFT connector. The inputs can be configured to be analog or digital.
For configuration of "audio input" refer to sections 4.4
or configuration of "audio input" refer to sections 4.4 P560 Codec Configuration
P561 Encoder Configurationand 4.6
Up to 8 audio connectors can be either assigned to analog or digital input and output
Up to 8 audio connectors can be either assigned to analog or digital input and output
Up to 8 audio connectors can be either assigned to analog or digital input and output
signals in variable combinations.
signals in variable combinations.
Following configurations are available:
Following configurations are available:
models
-4/ RIGHT 1-4, AES/EBU
nector. The inputs can be configured to be analog or digital.
nector. The inputs can be configured to be analog or digital.
and 4.6 P562 Decoder Configuration.
LEFT and RIGHT
560 Codec Configuration, 4.5
12