B. Braun Aquaboss CCS Instructions For Use Manual page 6

CCS
Signs and symbols used in the operating instructions
DANGER
WARNING
CAUTION
ATTENTION The signal word warns of material and environmental damage.
NOTE
→
Signs and symbols used at the control cabinet
Notes on operating instructions
The signal word indicates a high-risk hazard which, if not avoided, will cause death or
severe injury.
The signal word indicates a medium-risk hazard which, if not avoided, will cause death or
severe injury.
The signal word indicates a low-risk hazard which, if not avoided, will cause death or
severe injury.
The signal word points to suggestions / details on the economical use or just to a simpler
work step.
This symbol indicates a cross reference to a chapter within these operating instructions.
Protective earth connection
Ground connection
Observe the operating instructions
OFF (power supply, disconnect from mains supply)
ON (power supply, connect with mains supply)
Dangerous voltage
Note: residual risks. Refer to the requirement to obtain safety-related information
in the user manual.
The medical device manufacturer displays in accordance with the EU 90/385/EEC,
93/42/EEC and 98/79/EU Directives.
It shows the date on which the medical device was manufactured.
It shows the manufacturer's item number, so that a specific medical device can be
identified.
It shows the manufacturer's serial number, so that a specific medical device can be
identified.
A symbol for temperature limits. This shows the temperature limit values between
which the medical device can be safely exposed.
Rev. 2.8 Date 2019-02-04
Software version 1.00