Langauge, Menu Item 0; Entering The Date/Time, Menu Item 1; Input Of Automatic On/Off, Menu Item 2 - B. Braun Aquaboss CCS Instructions For Use Manual

CCS
8.2

Langauge, menu item 0

0 Language
XX
Esc + -
8.3

Entering the date/time, menu item 1

Day: Mon.
Date: dd.mm.jj
Time: hh:mm
Esc + -
8.4

Input of automatic on/off, menu item 2

2.1 Monday
2.2 Tuesday
2.3 Wednesday
2.4 Thursday
2.5 Friday
2.6 Saturday
2.7 Sunday
2.8 clearing all
 
Esc
2.1 Monday
On --:-- Off --:--
On --:-- Off --:--
Esc + -
2.8 clearing all
Reset= clear all
Esc
Page 8-2 System data parameters
Section 1 – Operating Instructions
The menu item 0 indicates the current user language.
A different language can be selected using  and confirmation through
the Esc key.
To change the display language, the system must be switched on using
the main switch (1) and the language selected accordingly under the
sub-menu "0" "Language". The menu is quit again by pressing the
"Esc" key.
Input screen date/time
Enter
Menu items 2.1 – 2.7 are used for programming the automatic start of
concentrate supply. A maximum of 2 automatic start and stop times can
be entered for each weekday. If the system is to remain in use through
24:00 / 00:00 h (change of day), no stop time is given for the first day of
operation, the stop time is programmed for the 2nd day. After automatic
mode has finished the control unit automatically switches to the initial
operating mode (system "off" or "manual mode").
Enter
The on/off times can be entered once the day has been selected.
Value input (00:01 to 23:59, 00:00 = --.-- = Off).
Enter
Clearing automatic program, menu item 2.8.
This item is used to reset all automatic times in one step.
When Enter is pressed all the time program data from Monday to
Sunday are deleted.
Enter
Rev. 2.8 Date 2019-02-04
Software version 1.00