Initial Commissioning; Language Selection; System Parameters - B. Braun Aquaboss CCS Instructions For Use Manual

4.

Initial commissioning

NOTE
CAUTION
Detailed familiarisation and instruction of the customer staff takes place at this point.
4.1

Language selection

First of all, the display language set must be checked and changed if necessary. The menu guide and
display messages can be provided in German, English, French, Spanish and Dutch.
For this purpose, the system must be switched on using the main switch (1) and the language selected
accordingly under the sub-menu "0" "Language". The menu is quit again by pressing the "Esc" key.
4.2

System parameters

Then the set system parameters must be adapted to local conditions and logged.
Figure 4-1:
Rev. 2.8 Date 2019-02-04
Software version 1.00
The system may only be commissioned by trained and skilled personnel or by a trained
representative authorized by B. Braun.
When handling liquid haemodialysis concentrates, it is mandatory to refer to the
manufacturer's safety provisions!
Incorrect commissioning of the system can lead to damage to the system and personal
injury.
Switch cabinet drilling pattern
Initial commissioning
Section 2 – Operating Instructions
CCS
Page 4-1