Telephone Connection (Xlt Only); Basic Telephone Service; Supplementary Services; Dtmf Keypad - ADTRAN Express XL User Manual

Chapter 2: Installation

TELEPHONE CONNECTION (XLT ONLY)

Basic Telephone Service

The Express XLT supports an analog DTMF telephone type (AT&T 2500) with
the POTS interface, part number 1200070L2. The telephone or other analog de-
vice (like a fax machine or modem) plugs into an RJ-11 jack labeled PHONE
located on the rear of the unit. Using a multipoint line allows the POTS and
data port to have unique phone numbers.

Supplementary Services

Supplementary services such as call holding, three- or six-way conferencing,
call transfer, and call waiting are fully supported by the Express XL/XLT on
a touch-tone telephone. Table 2-A explains how the flash-hook is used for han-
dling multi-call situations.

DTMF Keypad

The following functions are performed on a touch-tone phone:
• Disable call waiting:
• Enable call waiting:
• Redial last number:
• Enable ExpertISDN:
• Enter Area Code:
• Enter Phone Number 1:
• Enter Phone Number 2:
22
Press **0
Press **1
Press **5
Press **6
Press **7XXX
(where XXX is a 3-digit area code.
This must be entered first, before
enabling ExpertISDN.)
Press **8XXXXXXX
(where XXXXXXX is the 7- digit
phone number. This must be entered
before enabling ExpertISDN.)
Press **9XXXXXXX
(where XXXXXXX is the 7-digit
phone number. If only one phone
number is assigned, this does not have
to be entered.)
Express XL/XLT User Manual 61200070L1-1