ADTRAN Express XL User Manual page 162

Appendix E: Terminal Mode Commands
One of the following key words must be used first:
info Goes directly to ConÞguration/System Info menu.
isdn Goes directly to ConÞguration/WAN/ISDN menu.
pots Goes directly to ConÞguration/WAN/POTS menu.
ip Goes directly to ConÞguration/IP menu.
ipx Goes directly to ConÞguration/IPX menu.
bridge Goes directly to ConÞguration/Bridge menu.
security Goes directly to ConÞguration/Security menu.
connect Goes directly to ConÞguration/Connection List menu.
telnet Goes directly to ConÞguration/Management/Telnet menu.
snmp Goes directly to ConÞguration/Management/SNMP menu.
maint Goes directly to ConÞguration/Management/Maint menu.
dial Goes directly to ConÞguration/Dial menu.
status Goes directly to ConÞguration/Status menu.
test Goes directly to ConÞguration/Test menu.
logs Goes directly to ConÞguration/Logs menu.
util Goes directly to ConÞguration/Utilities menu.
Some examples are listed below:
isdn spid_1 20555512340101
telnet user 1 name ÒguestÓ
dial 3 dial
status ip 1 gateway
146
sets spid 1
sets user name for telnet user list entry 1
to "guest"
dials the numbers for connection list
profile number 3
returns the gateway address for IP route
table entry 1
Express XL/XLT User Manual 61200070L1-1