Default Initialization String; Figure 5-8. Initialization String Screen - GE TruTrak+ 3900 User Manual

3900/3900P User's Manual
To enter a custom initialization string:
1. From the MODEM SETUP screen, select CUSTOM.
2. Move to and enter the correct characters. Three lines are provided on the
3. Press

Default initialization string

To restore the default initialization string:
1. Display the INITIALIZATION STRING screen and select DEFAULT.
2. To restore the default string, select YES. A high tone sounds and DEFAULT
3. When the INITIALIZATION STRING screen reappears, press
5-12
INITIALIZATION
STRING
AT&D3&H1 ___
____________
____________

Figure 5-8. INITIALIZATION STRING screen

screen—if the string is too long to fit on the first line, continue it on the second
line, then the third line.
Use and to move the cursor to the character to be changed. Hold down
the key to move quickly.
Use – and + to move in descending (–) or ascending (
you want to enter. Hold down the key to move quickly through the available
characters:
. (period) A - Z, 0 – 9, $ / > + @ & # ? = , (comma) <space>
The initialization string may not have spaces before or between characters.
Use the "space" to eliminate, or erase, unwanted characters.
to record the string and return to the MODEM STATUS screen.
The RESET DEFAULT MODEM INITIALIZATION? message appears.
RESTORED appears briefly.
or
To retain the custom initialization string, select NO. A low tone sounds and
DEFAULT NOT RESTORED appears briefly.
the MODEM SETUP screen.
—
SpO
2
– / +
DEFAULT
—
+
) order to the character
+
+
to return to