Pulse Beep Volume Button; Alarm Volume Button; 13 Printer - GE TruTrak+ 3900 User Manual

n

11 Pulse beep volume button

+
–
This button adjusts the volume level for the pulse indicator in incremental
steps from OFF to level 5. The power-on default is 2 if SAVE LIMITS is set to
NO (see SETTINGS in chapter 2).
Press the + side of the button to increase the volume or the – side to decrease
it; you will hear the volume level as you press the button. As you press one of
these buttons, the values do not cycle through the available settings; e.g., when
you reach 5, the value does not cycle (or wrap) to OFF and vice versa.
As you adjust the volume, the volume setting is shown in the message area
above the waveform.
NOTE: The pitch of the pulse tone changes as the SpO
decreases—the higher the SpO

12 Alarm volume button

+
–
This button adjusts the audible alarm volume level in incremental steps from
1 to 5. You cannot set the alarm volume to OFF. The power-on default is 3 if
SAVE LIMITS is set to NO (see SETTINGS in chapter 2).
Press the + side of the button to increase the alarm volume or the – side to
decrease it; you will hear the volume level as you press the button. As you
press one of these buttons, the values do not cycle through the available
settings; e.g., when you reach 5, the value does not cycle (or wrap) to 1 and
vice versa.
As you adjust the volume, the volume setting is shown in the message area
above the waveform.

13 Printer

Monitoring data, current or trend, SpO
on the 3900P printer. See chapter 4 for specific operating instructions.
value, the higher the pitch of the pulse tone.
2
or PI pulsatile value, can be printed
2 r
1/Overview
value increases or
2
1-11