3900/3900P User's Manual
FAX
The fax feature requires the use of a Class 1 fax modem to send a fax to a Group 3
fax machine only.
To send data to a fax machine:
1. From the SEND screen, select FAX.
2. The PHONE NUMBER screen is displayed. Enter the phone number for the
3. After entering the phone number of the fax machine, press SEND.
5-6
fax machine.
PHONE NUMBER
––––––––––––––––––––
––––––––––––––––––––
Figure 5-4. PHONE NUMBER screen
The first time this screen appears, the phone number field is blank. The
number you enter appears the next time this screen is displayed.
You can edit an existing number or select CLEAR to remove it from the
screen, then enter a new number. If the number is long, continue it on the
next line.
Use
and
to move the cursor. Hold down the key to move quickly.
Use – and + to move in descending (–) or ascending (
character. Hold down the key to scroll quickly through the available
characters:
0 1 2 3 4 5 6 7 8 9 * # T P W , (comma) / ! @ – <space>
T = sends a tone dial (as from a push-button, or touch-tone, phone). Since
tone dial is the default for most modems, T is usually not needed.
P = sends a pulse dial (as from a rotary dial phone).
W or , (comma) = activates a pause that may be necessary on your phone
line before you can dial the rest of the phone number.
Example:
P9,1236574 indicates you are using a pulse dial phone from which you
must dial 9 to access an outside line, wait for the dial tone, then dial the
phone number.
Dashes and forward slashes are accepted, but not required. For an explanation
of the other characters you can use in the number string, refer to the
instructions for your modem.
SpO
—
2
– / +
CLEAR
—
SEND
+
) order to the new
+
+