Selecting Input Source; Using The Electronic Programme Guide(Epg) - Bush LE-32GKA Instruction Manual

How to use your TV
Let's get started

SELECTING INPUT SOURCE

You can connect multiple devices to your TV to improve
your watching and listening pleasure.
1. Press the SOURCE button on the TV or remote control
to open the source menu.
2. Use the buttons on the remote control to select
the source you wish to watch or listen to.
Note: Not all sources will be displayed
is open. You will need to use the
through the list to view all of the sources.
3. Press the OK button on the remote control to open
the selected source.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
How to use your TV
30
USING THE ELECTRONIC PROGRAMME
GUIDE (EPG)
Digital TV (DTV) channels only
Your TV has an Electronic Programme Guide (EPG) to
help you navigate through all your possible viewing
options. The EPG supplies information such as
programme listings, start and end times for all available
services. In addition, detailed information about the
programme is often available in EPG (the availability and
amount of programme information will vary,depending
on the particular broadcast).This function can only be
used when the information is broadcast by the
broadcasting companies.The EPG displays the
programme details for the next 7 days.
1. Press the EPG button on the remote control to open
when the menu
buttons to scroll
2. Use the
the Electronic Programme Guide window.
buttons to select the station you wish
to watch or listen to, then press the OK button to tune
to that station. Press the EPG button again to close
the Electronic Programme Guide window.