Table of Contents
Advertisement
Standard features
Simple everyday use
How to navigate menus - Selecting
source
1. Press the INPUT button on the remote control to
display the Input source list.
2. Press the
buttons to select the input source
that you want: Digital / Analogue / SCART / YPbPr /
DVD/ HDMI 1 / HDMI 2 / AV.
3. Press OK button to confirm your selection.
Electronic programme guide (EPG)
(DTV mode)
This system has an Electronic Programme Guide (EPG)
to help you navigate through all the possible viewing
options.
The EPG supplies information such as programme
listings, start and end times for all available services. In
addition, detailed information about the programme is
often available in the EPG (the availability and amount
of programme information will vary, depending on the
particular broadcaster).
This function can be used only when the EPG
information is broadcast by broadcasting companies.
The EPG displays the programme details for the next 7
days.
1. Press the EPG button to switch on EPG.
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
30
Standard features
2. Press EPG button or EXIT button again to switch off
EPG and return to normal TV viewing.
Info bar commands:
RED (Remind)
Press the RED button while on the selected programme,
the Remind setting menu will be displayed. You can view
and set the reminder time and frequency.
GREEN (PVR)
Press the GREEN button while on the selected
programme, the Record setting menu will be displayed.
You can view and set the recording time and frequency.
Press the buttons to adjust the settings then
select Save, and press OK button to confirm the settings.
Then
/
will be displayed as your reminders
shown. The TV will automatically tune to the selected
programme when it starts, and it will have a remind of
30s.
YELLOW (Prev. Day)
Press the YELLOW button to view the schedule of the
previous day.
BLUE (Next Day)
Press the BLUE button to view the schedule of the next
day.
●
REC
Timer Programming.
Note: A USB storage device must be connected to one
of the USB inputs to use the PVR or REC functions.
OK
Press to display detailed information of the selected
programme (if available).
Advertisement
Table of Contents
