Table of Contents
Advertisement
Unpacking precautions
Medical device delivered on a wooden pallet
The medical device positioned on a wooden pallet
may be easily moved using a forklift truck, as long
as this is used correctly.
Storage conditions
Room temperature:
Relative humidity :
Atmospheric pressure :
All storage must be carried out in accordance with the following recommendations:
– Clean, aired and temperate area.
– Medical device stored in an area sheltered
from bad weather and direct sunlight.
– Dry room.
– Medical device protected from shocks.
Conditions of use
– Dry and temperate area.
– Maximum altitude : 2000 m
Unpacking and Installation
Step by step
1) During unpacking, remove all staples and
remove the cardboard packaging carefully.
Caution : be careful with cutting tools, as fragile parts
of the medical device (covering, plastic housing, etc.) may
be near them.
2) If possible, transport the medical device
on its pallet up to the final place of use.
The medical device is adjusted to a resistant position
for transportation.
see: as indicated in the diagram
3) Cut the two green bands that fix the chair to
the pallet..
4) Next, take the chair off the pallet.
Caution
Four people are required to remove
the medical device from the pallet.
User Manual
Before transportation,
ensure that the forklift truck is correctly positioned
in relation to the pallet, and that the unit is stable.
-15 °C to +60 °C (+5 °F to 140 °F)
10 % to 90 % (without condensation)
0.5 bar to 1.05 bar (500 hPa to 1050 hPa)
– Do not store in an area subject to
frequent passage.
– Do not stack material.
– Keep in its original packaging until the
final destination.
– Temperature 10 to 40' C
– Relative humidity 75% maxi.
7
Advertisement
Table of Contents
