Table of Contents
Advertisement
The programmed functions are grouped on the foot pedal.
Foot pedal
(for models 2800-10 AND 2800-20)
Presentation
Safety note
When using pre-programmed positions (reception and examination),
do not leave the patient on the chair unattended.
Using the foot pedal
Just press and hold the foot pedal's push button to activate the desired movement. The movement stops as
soon as you take your foot off the pedal. The chair is fitted with an internal system that limits the upper and
lower positions.
Use the foot pedal to return to pre-programmed positions:
Note: These positions are factory default settings and cannot be changed by the user.
Double press on the Left side of the raising pedal to return to the examination position.
Double press on the Right side of the raising pedal to return to the reception position.
Remark:
This foot control operates with two (2) LR03 - AAA Alkaline 1.5V batteries.
In the event of malfunction, these batteries will have to be replaced.
(See page 29: REPLACING USED BATTERIES IN THE FOOT PEDAL
User Manual
L
R
17
Advertisement
Table of Contents
