Options; The Programmable Pedal Control; Using The 3 Pre-Programmed Positions; Selection The 3 Pre-Programmed Positions - promotal Elansa 1161 01 Series User Manual

Options

The programmable pedal control

(reference 1739)
To achieve the desired position, simply apply and
maintain pressure on the pedal. As soon as this
pressure is released, the movement will stop. The
table is fitted with an internal device to limit the high

Using the 3 pre-programmed positions

3 positions are pre-selected in the factory. Use the control pedal to set the table in one of the pre-programmed
positions.
Press the button of your choice (Marker 0), (Marker 1), (Marker 2). The table will automatically be placed in
the desired position.
● Marker 0 : Low Position.
● Marker 1 : High Position.
● Marker 2 : Intermediate Position.
The pre-programmed positions can easily be re-set.
Marker P
Marker 0

Selection the 3 pre-programmed positions

Use the pedal control.
Press the buttons with the arrows (To adjust the
height, backrest position, and seat) to place the table
in the position you want to program.
Once the table is in the desired position, you can
then program it.
Use your foot to press the button (Marker P) (To
activate the pre-selection process)
User's Guide
pedal control 1739 :
Pedal control 1739
2 button arrows
Height
and low positions. The height position of the table
may be adjusted while the patient is on the table.
Keeping your foot on the button (Marker P), at the
same time press the selection button (Marker 0).
The beep confirms that the first position 0 has been
programmed.
Repeat the same process for the other positions
(Marker 1) and (Marker 2).
Marker 2
Marker 1
27