Connecting Two Or More Applications With A Dc Link System; To One Energy Storage Solution - Koch 2.0 Series Operating Manual

5.3

Connecting two or more applications with a DC link system

to one Energy storage solution

Only one application has a brake resistor
Connect the Energy storage solution to this application.

Connect the brake resistor line to this application.

Several applications have a brake resistor and it is certain
that all applications always brake at the same time
Connect the Energy storage solution to any application.

Connect the brake resistor line to the same application.

Several applications have a brake resistor and it is not certain
that all applications always brake at the same time
(only for Energy storage solutions with a fixed setting for the working voltage
on the DC link)
Connect the Energy storage solution to any application.

Do not connect the brake resistor line (fixed default setting).

5 Commissioning
Operating manual Energy storage solutions
23
V1.3DE/EN