Ambient Conditions; Electrical Supply Data; Dimensions And Weight; Noise Emission - Koch 2.0 Series Operating Manual

Energy storage solutions
Table of Contents

Advertisement

Available languages

Available languages

2.7
2.8
2.9
2.10

Ambient conditions

Ambient temperature
Relative humidity
Type of cooling
Degree of protection for housing
Degree of contamination at place of
installation

Electrical supply data

Max. continuous voltage on DC link
Maximum power
Standby power dissipation
Usable storage capacity
Built-in discharge resistor
Overvoltage category
Immunity to interference

Dimensions and weight

Width
Depth
Height
Weight

Noise emission

The Energy storage solutions do not generate any significant
noise emissions (< 70 dB(A)).
2 Description of the device
-10° C to +65° C (transport, storage)
0° C to +40° C (operation)
≤ 95% (transport, storage)
≤ 85% (operation)
Air cooling (convection)
Separate cooling (for DEx 3.0)
IP20
2
800 VDC (DEx)
540 VDC (KEx)
18 kW (DEx)
10.4 kW (KEx)
< 10 W
approx. 1.6 kWs (DES)
approx. 2.0 kWs (DEK, DEV)
approx. 1.3 kWs (KES)
approx. 1.6 kWs (KEK, KEV)
PTC (see the enclosed data sheet)
In general, two variants are possible:
PTC800666 and PTC800680K
(Technical data can be found at
www.bremsenergie.de)
III (installed at altitudes up to 2000 m
above sea level)
II (installed at altitudes over 2000 m
above sea level)
Industrial area
to EN 61000-6-2-2005 and
EN 61000-6-4-2007
100 mm
201 mm
300 mm
approx. 6.9 kg
Operating manual Energy storage solutions
11
V1.3DE/EN

Advertisement

Chapters

Table of Contents
loading

Related Products for Koch 2.0 Series

This manual is also suitable for:

3.0 series

Table of Contents