Transport / Storage / Installation; Checking The Delivery; Transporting The Energy Storage Solution; Storing The Energy Storage Solution - Koch 2.0 Series Operating Manual

4 Transport / Storage / Installation

4
4.1
Scope of delivery

Checking the delivery:

4.2
4.3
4.4
14
Operating manual Energy storage solutions
V1.3DE/EN
T / S
RANSPORT TORAGE
Checking the delivery
The Energy storage solutions leave the factory in a tested and perfect condition.
Special packaging, consisting of cardboard, corrugated cardboard and protective
film, ensures safe transport.
There is a packing label on the outside of the packaging. This contains instructions
for transport, storage and proper handling which must be followed.
Any transport damage is the responsibility of the transport company.
• 1 × Energy storage solution
• 1 × Operating manual Energy storage solution
• 1 × data sheet for the built-in brake resistor (specific to order)
Please see the delivery note for the exact scope of delivery.
Check the packaging for damage.

Immediately notify the transport company about any damage to the packaging

and/or the Energy storage solution.
The transport company must receive a written damage report within 7 days.


Transporting the Energy storage solution

Transport the Energy storage solution to where it is to be installed in its original

packaging.
Avoid heavy vibrations and hard knocks.


Storing the Energy storage solution

The Energy storage solution must be stored in clean, dry areas.
Temperatures between -10° C and 65° C are permissible.
Any temperature fluctuations must not exceed 30 K per hour.

Unpacking the Energy storage solution

Carefully remove the Energy storage solution from its packaging.

Check that nothing is missing and that it is undamaged.

Dispose of the packaging in accordance with local regulations for cardboard boxes

and recyclable materials.
/ I
NSTALLATION