Table of Contents
Advertisement
The following options require more care in address selection and testing actions, as
conflicts with other users, servers and systems can occur:
LAN —
Connect the RCM2200's Ethernet port to an existing LAN, preferably one to
•
which the development PC is already connected. You will need to obtain IP addressing
information from your network administrator.
The RCM2200 is capable of direct connection to the Internet and other Wide
WAN —
•
Area Networks, but exceptional care should be used with IP address settings and all
network-related programming and development. We recommend that development and
debugging be done on a local network before connecting a RabbitCore system to the
Internet.
TIP: Checking and debugging the initial setup on a micro-LAN is recommended before
connecting the system to a LAN or WAN.
The PC running Dynamic C through the serial port on the RCM2200 does not need to
be the PC with the Ethernet card.
3. Apply Power
Plug in the AC adapter. The RCM2200 is now ready to be used.
38
RabbitCore RCM2200
Advertisement
Table of Contents
Need help?
Do you have a question about the RabbitCore RCM2200 and is the answer not in the manual?
Questions and answers