Table of Contents
Advertisement
3. R
To develop and debug programs for the RCM2200 (and for all
other Rabbit hardware), you must install and use Dynamic C.
This chapter
RCM2200.
3.1 Sample Programs
To help familiarize you with the RCM2200 modules, several sample Dynamic C programs
have been included. Loading, executing and studying these programs will give you a solid
hands-on overview of the RC M2200's capabilities, as well as a quick start with Dynamic C
as an application development tool. These programs are intended to serve as tutorials, but
then can also be used as starting points or building blocks for your own applications.
NOTE: It is assumed in this section that you have at least an elementary grasp of ANSI C.
If you do not, see the introductory pages of the Dynamic C User's Manual for a sug-
gested reading list.
Each sample program has comments that describe the purpose and function of the program.
Before running any of these sample program, make sure that your RCM2200 is connected
to the Prototyping Board and to your PC as described in Section 2.1, "Connections." To
run a sample program, open it with the
and run it by pressing
Sample programs are provided in the Dynamic C
sample programs that illustrate features unique to the RCM2200.
—Demonstrates the basic operation and the Ethernet functionality of the
•
RCM2200
RCM2200.
—Demonstrates more advanced TCP/IP programming for Rabbit's Ethernet-
•
TCPIP
enabled Rabbit-based boards.
Complete information on Dynamic C is provided in the Dynamic C User's Manual.
User's Manual
UNNING
provides a tour of the sample programs
File
F9
or by selecting
Run
S
AMPLE
menu (if it is not already open), then compile
in the
Run
menu.
folder. Two folders contain
SAMPLES
P
ROGRAMS
for the
11
Advertisement
Table of Contents
Need help?
Do you have a question about the RabbitCore RCM2200 and is the answer not in the manual?
Questions and answers