GRAPHTEC CE LITE-50 User Manual page 89

5.5
Performing Cut Tests
1 PIECE:
3 PIECES: Three "
the setting values.
Cutting 1 Test with the Setting Values
1.
2.
3.
starting position and touch the
CAUTION
When the "OK" is touched, the media and tool carriage will start moving. Be careful to avoid contact with
your body or any object.
" and " " to select the
" and " " to move the tool to the cut
Chapter 5 Detailed Settings
" mark.
www.delinit.by
5-11