GRAPHTEC CE LITE-50 User Manual page 33

2.6
Precautions when Creating Data
Notes regarding the Cutting Origin Position
The position of the cutting origin will vary depending on the settings for "Cutting Area". Create cutting data in
Tilt correction: Enabled
Margin: Normal/Expanded
regardless of the state in which the
Y
Cutting Origin
X
Tilt correction: Disabled
Margin: Normal
Y
X
Approx. 5 mm
Cutting
Origin
Approx.
10 mm
Chapter 2 Basic Operations
Tilt correction: Disabled
Margin: Expanded
from the front edge and the left edge.
Y
Cutting
X
Approx. 5 mm
Origin
Approx. 5 mm
2-11