GRAPHTEC CE LITE-50 User Manual page 41

3.3
Registration Mark Scanned Printing & Cutting
cutting the outline of a printed shape or when re-cutting media.
change the settings.
1.
2.
and set the tool.
3.
4.
Touch the
5.
registration mark scan starting area.
If the current position of the tool is far away from the registration
registration marks or the process may even end in an error.
Registration Mark Type 1
Y
X
6.
Touch the
7.
" and " " to move the tool to the
Registration Mark
Scan Starting Area
Chapter 3 Cutting along Printed Data
" and " "
Registration Mark Type 2
Y
X
Registration Mark
Scan Starting Area
3-5