Advertisement
Chapter 4 Convenient Functions
Loading the Media upon Releasing the Push Rollers
1.
2.
3.
When Scanning at the Edge of the Roll Media
push rollers.
Pass the roll media under the push roller positioning guide and load it so that it is parallel with the front
guide.
If the roll media
When Scanning the Roll Media at the Loaded Position
Insert the roll media until the position at which you wish to start cutting is at the home point.
Pass the roll media under the push roller positioning guide and load it so that it is parallel with the front
guide.
Home Point
Loaded Position
4.
Align the left edge of the roll media with the "I" marking of the "
Front Guide
5.
4-6
Roll Media
Cutting Mat
Scan at
Scan at
Edge
Front Guide
Set to be parallel
Roll Media Marking
" mark.
Leading Edge of Roll Media
Push Roller
Roll Media
Roll Media
Roll Media
Push Roller
" mark on the front guide.
Advertisement
