Advertisement
Loading the Media upon Releasing the Push Rollers
1.
Raise the media set levers and release the push rollers.
2.
3.
the push rollers.
Pass the carrier sheet under the push roller positioning guide and load it so that it is parallel with the
front guide.
Cutting Mat
Push Roller
Guide
Set to be parallel
4.
Align the left edge of the carrier sheet with the "I" marking of the "
Front Guide
5.
6.
screen instructions.
CAUTION
When the "CARRIER SHEET" is touched, the media and tool
carriage will start moving. Be careful to avoid contact with your
body or any object.
Leading Edge of Carrier Sheet
Leading Edge of Carrier Sheet
Push Roller
Carrier Sheet
Sheet Media / Carrier Sheet Marking
Chapter 4 Convenient Functions
" mark.
Cutting Mat
Push Roller
Carrier Sheet
" mark on the front guide.
Carrier Sheet
4-13
Advertisement
