GRAPHTEC CE LITE-50 User Manual page 46

Chapter 3 Cutting along Printed Data
[2] Creating data for printing & cutting
1.
2.
Cut...".
3.
[3] Printing the created data
1.
Print the created data.
CAUTION
Be careful to observe the following items as doing otherwise will lead to not being able to scan the
registration marks and perform the cutting.
Set the enlargement/reduction scale to 100%.
Set the printing position (center / bottom left, etc.) to "Do Not Change".
3-10
Y
X
". Y
X
Registration Mark Type 1 Registration Mark Type 2
Registration Mark Type 1 Registration Mark Type 2
Cutting Data